Aluminium Trihydroxide Filler Powder

Aluminium Trihydroxide Filler Powder. Aluminium trihydroxide powder is a flame retardant filler used to improve the fire resistance of polyester resins. Synonyms for ath you might be familiar with include:

Aluminium Trihydroxide (ATH) Filler Powder Easy Composites from www.easycomposites.co.uk

Manufactured from the prealloyed powder. It is a white, odorless, tasteless powder of high purity (99.7%). Its low moisture content makes it an ideal filler for use in a wide variety of polyurethane systems.

Source: www.indiamart.com

Aluminium trihydrate (also known as ath and aluminium trihydroxide, chemical formula al (oh) 3) is initially derived from bauxite ore, before being refined into a fine white powder. Alumina trihydrate (ai 2 o 3 •3h 2 o) is the most widely used flame retardant in the world due to its versatility and low cost.

Source: www.easycomposites.co.uk

Among them, aluminum oxide (al 2 o 3) and its compounds have long been known for more than a century, for example, aluminum oxide hydroxide (alooh) and aluminum trihydroxide (al(oh) 3). In such cases, aluminum trihydroxide (ath) with density of 2.4 g/cm 3 is used.

Al 2 O 3 Or Alumina Generally Refers To Corundum.

Relevant identified uses of the substance or mixture and uses advised against The low absorption of uv makes it a suitable material for applications in uv curable materials. The cooling capability of aluminum trihydroxide comes from its ability to release water at elevated temperatures with peak release at around.

In Such Cases, Aluminum Trihydroxide (Ath) With Density Of 2.4 G/Cm 3 Is Used.

Its flame retarding activity is due to cooling, barrier layer formation, and dilution. Additional information pot life (200g, 25°c) minutes Aluminium trihydroxide powder is a general purpose filler which also provides flame retardancy and smoke suppression.

Synonyms For Ath You Might Be Familiar With Include:

The loss of 34.6 % of its weight as water vapour also dilutes combustible gases. Aluminum hydroxide (fine powder pure, hydrargillite), technipur™; However, sometimes it is a disadvantage in terms of covered surface area per kg powder.

200G Of Filler Powder To 100G Of Resin).

When heated above temperatures of approximately 200°c, an endothermic reaction will take place, liberating 3 molecules of crystal water and thereby removing energy from the combustion zone. Among these flame retardant fillers ath is more preferred and widely used because of its low toxicity, low cost, smoke suppression ability etc. When the end product is sold by weight, the high density of barium sulphate (4.4 g/cm 3) compared to other fillers is also a clear advantage.

Its Low Moisture Content Makes It An Ideal Filler For Use In A Wide Variety Of Polyurethane Systems.

Metallic hydroxide flame retardants encompass largest volume of flame retardant fillers used in the polymer industry which mainly include aluminium trihydroxide (ath) and magnesium hydroxide (mh). Available in different particle sizes, it can be used in a wide range of polymers at processing temperatures below 220°c. It is a white, odorless, tasteless powder of high purity (99.7%).