Best Powder For 9Mm 115 Grain

Best Powder For 9Mm 115 Grain. Fwiw, lyman shows start loads for 120 gr lead (this would be okay to use with your 115s), of about 4 gr unique and 5 gr of pp. Best powder for 9mm 115 gr fmj.

Sperry Ballistics 9mm 115 grain Full metal Jacket Round from www.sperryballistics.com

Of the powders you have mentioned, i. The bullet weight and configuration i think is important. If using rainier's plated bullets in 9mm and they have the flat base rather than the restruck (concave) base, use powders no faster than aa5 or aa7.

Source: www.sperryballistics.com

I'm using the bottom of that range (3.9) figuring it was the safest place to start. Your milage may vary and any use of the load mentioned is at your own risk.

Source: armslist.com

Best powder for loading 9mm 115 gr. I also have 1000 9mm 124 grain plated round nose bullets on order if you could recommend a starting load for that i would appreciate it.

Federal, Winchester, Or Tzz Cases.

I'm using the bottom of that range (3.9) figuring it was the safest place to start. It works fine in every 9mm i have fired, and offers good accuracy and a clean powder burn. 818 to 825 fps (contributed by a friend) discussion:

Hornady 115 Gr.355, 9Mm Round Fmj Round Nose Powder Is:

It burns completely and fast. Unique is a very consistent burning powder and it is almost a. Fwiw, lyman shows start loads for 120 gr lead (this would be okay to use with your 115s), of about 4 gr unique and 5 gr of pp.

Cci 500 Small Pistol Case:

Of power pistol powder, was the most accurate load in all my 9mm pistols (sig, glock, walther, cz, ruger). It has such a forgiving pressure curve that you can’t blow anything up. That load made 1315 fps from a glock 19.

Your Milage May Vary And Any Use Of The Load Mentioned Is At Your Own Risk.

The max oal is listed as 1.090 and the starting powder weight is 3.5 with a max of 4.9 If i remember correctly i was having feed issues in my glock with some that were closer to 1.10 Berry’s plated 9mm 115 grain rn ds primer:

The Best All Around Powder I've Used So Far Has Been Cfe Pistol.

I wants some opinions on the powder selections for 9mm 115 gr loads. Pp is prolly the best powder for the 9mm. I also have 1000 9mm 124 grain plated round nose bullets on order if you could recommend a starting load for that i would appreciate it.