Monday, March 27, 2023

Unique Powder Loads For 40 S&W

Unique Powder Loads For 40 S&W. That basically duplicates factory ammo and is a good load. 40sw load with 165 gr speer gdhp, speer case, cci 500 primer, unique 7.2 gr, velosity 1064, min oal 1.12, max load data.

ARMSLIST For Sale Hodgdon Pistol powder
ARMSLIST For Sale Hodgdon Pistol powder from www.armslist.com

This is a great hunting load and for sd i substitute a hst 180g. The maximum charge of unique (speer 13: Winchester small pistol (wsp) powder:

1.125 180 Lead Bullet Alliant Unique 5.5 973Fps So I Would Start At 5.2G And Work Your Way Up From There Using A Crono To Determine Results As Far As Power Factor, Etc.


Might be a little light but these are my first.40 reloads. It's not like 9mm or 45acp where you can exceed & be into +p territory. I no longer own or load for a 40 but i have in the past.

Winchester Small Pistol (Wsp) Powder:


Use load data at your own risk. If i were determined to use 'unique' with the xtp i would reduce the starting load to 6.4 and load at 1.125col no more than a dozen rounds to test. My load for my.40's is 180g cast with 7.2g of power pistol that carries 1165fps out of a g27 with a kkm barrel.

That Basically Duplicates Factory Ammo And Is A Good Load.


For the same load, although i carry factory hst 180g for edc. Maybe not a best choice, but certainly a fair one. Alliant 40 s&w load data using unique powder.

Second Favorite Load For The.40'S Is 155G Cast Over 8.6G Of Power Pistol For 1296Fps Over The Chrony.


I'm starting with 5.0 of unique with 180gr missouri lead bullets. Great for light 12, 16, 20 and 28 gauge loads. 7 rows.40 smith & wesson /.40 s&w (select unique loads) reloading data with 3 loads.

You Can Safely Use The Load Data For Heavier 180 Grain Bullets.


Trail boss is overflowing the 40 s&w case by about 1.2g (iow, 6.0 grains. 24 october 2003 who bullet powder oal vel pf note(s) layne simpson 150gr sierra jhp 6.3gr w231 ? My favorite 9mm and.40 powder so far has been power pistol.

Labels: , ,

0 Comments:

Post a Comment

Subscribe to Post Comments [Atom]

<< Home