Aa 5 Powder For 45 Acp

Aa 5 Powder For 45 Acp. The 1096 fps' load in the.41 mag' is done with aa #2 with a 210 gr' xtp bullet. You might be able to get a double charge of aa#5 into a.45 case, but there's no way you won't notice it when you seat the bullet.

AA5 powder in .45ACP? from www.ar15.com

5.8gr unique is a nice soft shooting load under the same bullet. The aa#5 will be a very low load density (and it is a spherical powder remember) trying. I'm a fan of silhouette under 230gr xtps fora.

Source: bc.hodgdon.com

I'm a fan of silhouette under 230gr xtps fora. The same loads in a g30 are running 850 fps.

Source: www.ar15.com

As far as aa#5, there is an even better powder and that is ramshot true blue. When selecting a powder for the.45 acp, there are many good options.

It Burns Clean And Outperforms W231.

I think aa#5 is a great powder for the 45 acp.especially with cast bullets. I have to get that out of the way before i begin. Bullets cast of coww + 2% tin sized at.452 and lubed with bac or any nra 50/50 lube are always very accurate.

I Have Been Using Aa#2 For About 15 Years In.380, 9Mm,.38,.357, And.45 Acp.

I prefer using just one powder for various reasons. They both gave me better accuracy than i could ever use. We bring the best ballistic technicians and the highest quality components together to.

30 Ar, 30 T/C, And 6Mmx45 Po B O X 158 • M Iles C I T Y, M O N Tana 59301 Reloading Powders Gun.

Just the same, i have an open eye and mind, and i am not blind to other developments. The small case and short powder burning time of the.45 acp requires a faster burning powder, like bullseye or unique. The aa#5 will be a very low load density (and it is a spherical powder remember) trying.

I've Found That 5.3 Gr Of Aa#2 Is An Accurate Load With A 200 Gr Lsw.

All the major powder manufacturers make propellants with appropriate density and burn rate characteristics for the.45 acp. #7 and #9 are too slow for the 45acp, and. Trail boss is new for the.45 acp, but it shoots very well with a lead bullet (you can use jacketed also) and is quite mild but works the slide well in loads i have tested so far.

I've Used Plenty Of Both.

#7 will work, but is not the best choice. In a 3.5 barrel the aa #2 and #5 would be my absolute choices. Aa#2, or aa#5 are the best for.45acp, with #7 being the slowest burning powder.